This stand-up pouch is specified for 1–5 L liquid detergent refill programs, with a bottom gusset that lets the filled pack stand for shelf, refill-station or institutional dispensing use. The standard structure is PET/VMPET/PE, combining a printable outer PET layer, a metallized VMPET barrier, and a chemical-resistant PE sealant; PET/AL/PE and higher-barrier PE options are available after compatibility review. A center or corner spout can be fitted with a tamper-evident screw cap or dispensing valve, supporting controlled pouring into bottles, reservoirs and cleaning-chemical containers. Filling can run through the spout or open top, depending on line setup and cap torque requirements. The pouch is intended for detergent concentrates, hand sanitizer and light-industrial cleaning fluids, with refill/reuse programs supported by durable fitments and clear fill-level artwork.
Branding is produced by 10-colour rotogravure, which gives smooth gradients, dense detergent-brand colors and consistent registration across long runs; matte or gloss lacquers, opaque white underlay and QR/batch areas can be included. Artwork is checked for spout position, seal zones, fill-level indication and US East Coast retail or institutional label needs before plates are cut. Standard MOQ is 10,000 pouches per SKU/design; lower trial quantities can be quoted for line validation. Sampling typically includes a plain or printed pre-production sample, fitment check and film hand-feel review. We recommend confirming detergent concentrate compatibility, cap torque and drop/transport requirements before bulk release. Printing plates, pouch dimensions and spout type are customized to the filling line, so samples should be approved before production.
For East Coast household, institutional and light-industrial buyers, this pack supports refill and reuse programs while reducing rigid-bottle logistics. UN transport-ready options can be reviewed against the final pack, filling weight, closure and outer packaging combination; any UN rating must be confirmed by the applicable test and documentation, not assumed from the pouch alone. Common applications include liquid detergent concentrate, hand sanitizer, cleaning chemicals and lubricants where the film/fitment compatibility is approved. Lead time is typically 15–25 days after artwork, plate approval and deposit, with pre-production samples in about 7–10 days. Please share fill volume, detergent chemistry, spout/cap preference, target MOQ and labeling requirements so we can quote a compliant stand-up pouch specification.
