This roll film is engineered for degreaser refill and dispensing pouches used by East Coast household, institutional and light-industrial buyers. A typical laminate is PET/VMPET/PE or PET/AL/PE, selected for solvent and alkaline cleaner resistance, puncture toughness and low odour transfer. The reverse-printed outer PET carries the brand graphics, while the VMPET or aluminium barrier limits vapour loss and protects the degreaser concentrate during storage and transport. Sealant layers are chosen for strong spout, valve and fin-seal bonds on horizontal or vertical form-fill-seal lines. Film width, roll diameter, core size and repeat length are specified to your filling equipment, helping reduce changeover waste and maintain consistent pouch registration for 500 mL to 5 L refill formats.
Printing is produced by 10-colour rotogravure, giving crisp warning symbols, bilingual instructions and brand-matched colour across long runs. We can supply matte or gloss finishes, registered tactile marks and repeat-safe artwork for roll-fed filling. For degreaser programmes, the film is supplied as rollstock compatible with spouted pouches, bag-in-box fitments and dispensing valves; fillers can run manual, semi-automatic or automated lines. Sampling typically starts with structure and artwork review, followed by pilot rolls or pouch samples for fill, drop and valve-fit checks. Production MOQ is 10,000 pieces or equivalent roll metres, depending on format and print complexity. Lead time is usually 18–25 working days after artwork and sample approval, with scheduling confirmed at order. UN-rated transport formats can be discussed during specification, using appropriate barrier and seal integrity for the chosen pack design.
The film is suited to concentrated and ready-to-use degreasers, workshop cleaners, parts-washer top-up packs and institutional refill programmes where controlled dispensing matters. Chemical-resistant sealants and barrier layers help protect print, limit leakage risk and support refill/reuse systems with spouts, taps or valves. Buyers can specify clear, white or metallised constructions, plus roll orientation and unwind direction for their filler. As a Guangdong-based flexible-packaging factory, we run a 15,000 m² clean workshop and control lamination, rotogravure printing, slitting and packing in one supply chain. Our team reviews cleaner chemistry, fill temperature, pouch size and transport profile before recommending a laminate, so the roll film performs reliably from filling through warehouse and distribution. Custom artwork, size trials and pre-production samples are available before the 10,000-piece MOQ run.
