This UN transport-ready liner bag is specified for paint base handling where a stable, low-permeation pack is required. The laminate can be built as PET/AL/PE or PET/VMPET/PE, with a light-blocking aluminium or metallised barrier layer and a chemical-resistant PE inner contact layer. A centre or corner spout or dispensing valve supports closed filling and controlled dispensing into pails, mixers or refill stations. The liner format lets buyers pair the bag with a corrugated or reusable outer container, separating structural support from the liquid-contact package. Capacity can be quoted around a 5 L nominal fill, with 1.5–20 L options subject to drawdown and spout selection. Final UN-rated transport performance depends on the complete tested pack configuration, outer packaging and closure system.
Filling is typically completed through the spout on automatic or semi-automatic spout-fill equipment, followed by cap torque control and outer-carton packing. For paint base, we recommend validating the PE contact layer and spout gasket against the actual solvent or waterborne formulation before production. Printing is available by 10-colour rotogravure, allowing brand blocks, batch fields, safety text and East Coast distribution instructions to be placed on a light-blocking white or metallised base. Artwork should allow for spout position, seal areas and lot-code windows. Standard MOQ is 10,000 pieces per SKU, with lower quantities considered for sampling or pilot programmes. Pre-production samples can be produced from selected film and spout combinations so buyers can test fill, closure, drop and dispensing performance before committing to a full run.
Because paint base can vary from waterborne dispersions to solvent-containing systems, the liner bag should be selected as part of a complete packaging brief rather than by capacity alone. Share the formulation, fill temperature, intended shelf life and dispensing method so the structure, spout bore and gasket material can be matched. The bag-in-liner format supports refill and reuse programmes when the outer container is designed for return, while the flexible inner can be collapsed to reduce residual product and cleaning load. For East Coast buyers, we quote FOB Dongguan or discuss freight-ready export packing. Production lead time is typically 20–30 days after artwork and sample approval, depending on film availability, spout type and order volume. We can supply dimensional drawings and sealing recommendations for filling-line integration without making unverified performance claims.
