点击缩略图切换主图
A UN-rated transport-ready foil pouch for lubricant oil refill programmes, combining oil-resistant PET/AL/PE laminate, leak-resistant spout options, 10-colour rotogravure branding, and 1L–20L capacities for East Coast fillers.
| Capacity | 1L–20L; quart, gallon and pail-replacement refill formats |
|---|---|
| Structure | PET/AL/PE or PET/VMPET/PE oil-resistant foil laminate; other compatible laminates on review |
| Spout/Valve | Top-fill, center or corner spout; screw cap, flip-top or dispensing valve options |
| Printing | 10-colour rotogravure; matte, gloss or registered spot-colour finishes |
| MOQ | 10,000 pouches per design and size; lower trial quantities for sampling only |
| Lead time | 15–25 working days after artwork approval and deposit, dependent on specifications |
This foil pouch for lubricant oil is built on an oil-resistant laminate such as PET/AL/PE or PET/VMPET/PE, with a high-barrier aluminium foil layer to limit oxygen and moisture ingress while the inner PE sealing film contacts the lubricant. The pouch format supports 1L to 20L fill volumes for quart, gallon and pail-replacement refill programmes, with flat, gusseted or stand-up profiles available. Seams are made by heat sealing and can be specified for hydraulic oil, motor oil, gear oil and similar light-industrial lubricants. The laminate is selected for puncture resistance and flex durability during filling, palletising and East Coast distribution. Food-contact grade film is not claimed for lubricant use; material grade is matched to the chemical compatibility review.
Filling options include top-fill spouts, center spouts and corner spouts with screw caps, flip-top caps or dispensing valves sized for manual and semi-automatic lines. The spout and cap assembly is selected for oil resistance and repeated opening, supporting refill and reuse programmes where clean dispensing is required. For UN-rated transport positioning, closures, fill weight and outer packaging must be confirmed through the final package design review and any required drop and stack testing. The pouch can be supplied with tear notches, handle openings and box-ready formats for institutional and light-industrial buyers. Each production batch is checked for seal integrity, spout fit and print registration before packing. Filling temperatures and line speeds should be validated with the chosen laminate and valve.
Branding is produced by 10-colour rotogravure printing on the foil laminate, with matte, gloss or registered spot-colour finishes for private-label lubricant ranges. Artwork can include batch codes, fill-volume marks, warning panels and bilingual dispensing instructions. Standard MOQ is 10,000 pouches per design and size, with lower trial quantities considered for sampling only. We provide pre-production samples and printed pouch proofs before mass production, allowing spout, cap and laminate checks on your filling line. Typical lead time is 15–25 working days after artwork approval and deposit, depending on spout type, print complexity and order volume. Freight planning for US East Coast ports is quoted separately, and packaging can be specified for palletised or boxed shipment.
更新时间: 2026-11-05
1. 本公司仅从事包装袋的产销，不生产销售任何本页面展示的成品商品；
2. 本页面展示的图案、图片及相关内容，仅用于包装袋设计、印刷效果或产品能力展示，不代表本公司生产或销售对应成品商品，也不代表本公司享有相关图案、商标、品牌等权利；
3. 如展示图片中包含商标、标识、品牌名称或其他知识产权内容，相关权利均归其合法权利人所有，本公司未取得该等权利人的授权、许可或认可，与相关权利人之间不存在关联、合作、赞助或背书关系；
4. 本公司无侵犯任何第三方合法权益的意图，亦不主张对展示内容享有任何知识产权，相关展示不应被视为商标性使用、品牌代言或商品来源指示；
5. 如任何权利人或第三方认为本公司展示内容侵犯其合法权益或存在不当之处，请通过本页面所列的电话或邮箱与本公司联系，本公司将及时删除、替换或调整相关内容。
A chemical-resistant foil pouch for 1–4 L degreaser concentrate, built with high-barrier laminate and a dispensing spout for East Coast refill, institutional and light-industrial buyers seeking UN-rated transport options.
A chemical-resistant foil pouch for liquid detergent refill and cleaning-chemical transport, built with high-barrier laminates, welded spouts, 10-colour rotogravure printing and factory-direct MOQs for US East Coast buyers.
Chemical-resistant foil spout pouch for 1–10 L floor cleaner refill programs, with 10-color printing, dispensing-valve options, 10,000-piece MOQ and East Coast institutional or light-industrial supply.
留下您的需求，我们将在工作时间内尽快与您联系，提供材质与工艺建议。